Before starting this process, please ensure that there are no modules inserted in the L6 Host.
Download the latest SEPIA firmware update image from below.
The file will be in .swu format (eg. update-image-openstlinux-eglfs-myir.swu) and is ready to use for the update process.
It is recommended to also update your SEPIA Control software to the latest version to ensure optimal performance.
Turn on your SEPIA L6 Host and connect it via Ethernet (Cat5) to your network or computer.
Launch SEPIA Client/Plugin on your device, the host will appear in the Setup tab.
Locate the field showing the host’s IP Address (e.g., 169.254.224.80), and copy this address.
Using your internet browser of choice (not Chrome), open a new tab and enter in your host’s IP address followed by the port “:8080”. This will open the update interface.
Drag the .swu file into the upload box on the update page.
Wait for the update to occur. Do not turn off the power or cut the network.
DO NOT click the blue Restart Sepia button.
After the update completes, WAIT 60 SECONDS and then reboot your SEPIA host by switching the power off and on to finalize the installation.
Previous firmware versions
Please contact SEPIA technical support on service@karno.com
We respect your privacy. We only collect and use your IP address for currency conversion when using our Shopify integration. This helps us provide the right currency based on your location. We don’t share this data and only keep it for as long as necessary. For our full statement Click Here
