If your SEPIA L6 host is configured with a fixed IP address that is inaccessible on your network, this guide explains how to change the IP address without requiring any network connection to the host.
Note: If your host is not on the required firmware version and is already stuck on an inaccessible IP address, please contact SEPIA Technical Support for assistance.
Insert the USB flash drive into your computer.
Open a plain-text editor of your choice (for example, TextEdit on macOS).
Decide which IP address you want the host to use.
To assign a static IP address, enter the following line:
ADDRESS=10.10.10.10/24
Replace 10.10.10.10 with your desired IP address.
To set the host to DHCP mode, leave the text file completely blank.
Note: You may edit this file as many times as needed, just remember to save after each change.
Make sure the file is saved as plain text.
In TextEdit (macOS), go to: Format → Make Plain Text.
Save the file with the exact name:
configure-from-usb.cfg
Ensure the file extension is .cfg.
Ensure the SEPIA L6 host is powered on.
Insert the USB flash drive into the TOP USB SLOT host, and wait approximately 1 minute for the configuration to be applied.
We respect your privacy. We only collect and use your IP address for currency conversion when using our Shopify integration. This helps us provide the right currency based on your location. We don’t share this data and only keep it for as long as necessary. For our full statement Click Here